ANZSCO Occupations 4 - Visa Solutions Official

Occupation: 324111 - Panelbeater

(Vehicle Refinisher)

Repairs damage to metal, fibreglass and plastic body work on vehicles and forms replacement vehicle panels. Registration or licensing may be required.

Skill Level:
The entry requirement for this occupation is the qualifications and experience. AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks Include:

removing damaged panels and parts, and removing upholstery and accessories to gain access
removing dents by hammering panels
straightening damaged vehicles and parts using mechanical and hydraulic equipment
replacing badly damaged sections with new or second-hand panels
filling depressions with plastic filler, and filing, grinding and sandng repaired surfaces
cutting and joining replacement sections using welding equipment
fitting repaired or replacement panels on vehicles and refitting body hardware such as door locks and trims
may assist vehicle body builders in constructing and restoring custom-designed, vintage and other specialty vehicles
may spray-paint vehicles

Occupation: 334111 - Plumber (General)

Installs and repairs water, drainage, gas and sewerage pipes and systems. Registration or licensing is required.

Tasks Include:

studying blueprints, drawings and specifications to determine the layout of plumbing systems and materials required
setting out and installing hot and cold water systems and assoicated equipment
installing water-based fire protections systems, including fire hydrants, hose reels and sprinkler systems
designing and installing sanitary plumbing and water supply systems, discharge pipes and sanitary fixtures
fabricating and installing soil and waste stacks
assembling and installing mechanical services plant, air handling and conditioning equipment and small bore heating systems
installing sewerage and effluent pumping equipment and disposal systems
installing below-ground drainage systems and associated ground support systems
installing gas appliances, flues and pressure regulating devices
fabricating and installing metal roofing, rainwater goods and flashings

Specialisations:
Fire Services Plumber
Sanitary Plumber
Water Plumber

Occupation: 342414 - Telecommunications Technician

(Communications Technician)

Installs, maintains and repairs telecommunications equipment and appliances, such as telephones, mobile telephones, switchboards and data transmission equipment, in homes, businesses, telephone exchanges and other network sites.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or relevant vendor certification may be required in addition to the formal qualification.

Tasks Include:

examining drawings, specifications and work areas to determine positioning and connections for equipment to be installed
locating faults in telecommunications equipment using instruments such as ohmmeters, voltmeters, ammeters and transmission measuring equipment
attaching wires and cables to appliances
adjusting, replacing and repairing faulty items, and testing equipment using electronic instruments
installing cabling for telephone, radio, pay TV and computer transmission
joining cables and sealing sheaths with lead and thermoplastic
erecting, testing and maintaining aerial and underground wires and cables and radio and mobile phone antennae
installing telecommunications equipment and appliances such as telephones, switchboards and data transmission equipment

Specialisation:
Technician Telecommunication Systems (Army)

Occupation: 392211 - Graphic Pre-press Trades Worker

Manipulates, sets and composes text and graphics into a format suitable for printing and other visual media.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks Include:

operating graphic cameras and other photographic equipment to reproduce camera-ready copy onto films, plates and digital output devices
using computer applications to generate images, text, layouts and impositions for print and other visual media displays
operating plate making equipment to reproduce images from film to printing plates, digital output devices and presses
operating computer screen-based equipment for scanning, colour separation, colour correction, masking, creative design, combining, imposing, retouching, and other processes used to transfer copy to film and produce film for plate, digital output and cylinder productions
carrying out digital and chemical proofing from digital systems and negative and positive films
evaluating printed proofs, checking and correcting them for quality
preparing and exposing carbon tissue for laying on clyinders by transfer method, and developing images

Specialisation:
Desktop Publishing Operator

Occupation: 394299 - Wood Machinists & Other Wood Trades Workers NEC

This occupation group covers Wood Machinists and Wood Trades Workers not elsewhere classified.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in adddition to the formal qualification.

Tasks Include:

studying drawings, work orders and sample parts to determine specifications
determining tooling and machine requirements and sequence of operations
setting up woodworking machines and wood stock for correct cutting, planning, turning, shaping and sanding
operating machines to cut, plane, turn, shape and sand work pieces
removing old finishes by stripping with steel wool and glasspaper, and by applying solvents and paint strippers, and removing softened finishes by scraping
applying varnish, shellac, lacquer, stains and paint to surfaces and polishing and waxing finished surfaces
fitting and fastening frame pieces
mounting backing materials and subjects for framing

Specialisations:
Cane Furniture Maker
Cooper
Wood Model Maker

Occupation: 399611 - Signwriter

Designs, fabricates and paints signs for displays, buildings, hoardings, boats and structures.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing may be required.

Tasks Include:

conferring with clients and responding to proposals, sketches and written instructions to determine composition of signs
designing and creating signs and graphics using computer software and signmaking machines
designing and creating signs by measuring and calculating letter size, preparing the surface, applying background paint using brushes, sprays and rollers, and creating the letters using brushes, stencils, enamel paint and decals
designing and creating wall murals, screen prints, gold leaf work and custom vehicle art
painting signs and lettering using lacquers, varnishes, paints and other materials
painting signs on brick, metals, timber, glass, plastic and other surfaces
making and erecting three dimensional signs
preparing cost estimates for labour and materials
may erect and work in scaffolding
may install signs on-site.

Specialisation:
Sign Manufacturer

Occupation: 324211 - Vehicle Body Builder

(Vehicle Body Maker)

Manufactures and repairs prototype production units and purpose-built vehicle bodies such as buses, trucks, fire engines and caravans.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing may be required.

Tasks Include:

constructing framework sections in metal, wood, fibreglass and other materials using shaping machines and cutting and welding equipment
bolting, screwing, riveting and welding sections together to form complete frameworks
cutting and shaping panels of sheetmetal, aluminium and reinforced plastic and attaching to frameworks using hand and power tools
modifying assembly line vehicles to special requirements
preparing new vehicle trim work according to drawings and sketches, and removing old coverings and fittings from vehicles and taking new measurements
selecting and cutting pieces of fabric, vinyl and leather and sewing pieces together using heavy-duty sewing machines
installing internal trim in vehicles such as lining, floor coverings and armrests
attaching door trims, rubber seals, locks and handles

Specialisation:
Coach Builder

Occupation: 334112 - Airconditioning & Mechanical Services Plumber

Installs, maintains and repairs piping, ducting and equipment for heating, cooling and ventilation of buildings or vessels. Registration or licensing is required.

Tasks Include:

studying blueprints, drawings and specifications to determine the layout of plumbing systems and materials required
setting out and installing hot and cold water systems and assoicated equipment
installing water-based fire protections systems, including fire hydrants, hose reels and sprinkler systems
designing and installing sanitary plumbing and water supply systems, discharge pipes and sanitary fixtures
fabricating and installing soil and waste stacks
assembling and installing mechanical services plant, air handling and conditioning equipment and small bore heating systems
installing sewerage and effluent pumping equipment and disposal systems
installing below-ground drainage systems and associated ground support systems
installing gas appliances, flues and pressure regulating devices
fabricating and installing metal roofing, rainwater goods and flashings

Specialisation:
Ductfixng Plumber

Occupation: 351111 - Baker

Prepares and bakes bread loaves and rolls.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks Include:

checking the cleanliness of equipment and operation of premises before production runs to ensure compliance with occupational health and safety regulations
checking the quality of raw materials and weighing ingredients
kneading, maturing, cutting, moulding, mixing and shaping dough and pastry goods
preparing pastry fillings
monitoring oven temperatures and product appearance to determine baking times
coordinating the forming, loading, baking, unloading, de-panning and cooling of batches of bread, rolls and pastry products
glazing buns and pastries, and decorating cakes with cream and icing
operating machines which roll and mould dough and cut biscuits
emptying, cleaning and greasing baking trays, tins and other cooking equipment

Specialisation:
Doughmaker

Occupation: 392311 - Printing Machinist

Produces books, magazines, newspapers, brochures, posters, leaflets, packaging materials and stationery using printing presses.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks Include:

setting, adjusting and monitoring substrate-feed mechanisms, delivery mechanisms, inking systems and other printing machine functions
mixing ink and solvents to standard, and regulating paper and ink supply during print runs
monitoring, evaluating and determining press operations manually and by computer to check print quality standards aganst proofs and detect malfunctions
producing a variety of printed products using relief, lithographic, flexographic and gravure printing presses, and in-line finishing systems
preparing plates, blankets and impression cylinders on small offset lithographic printing presses
loading paper into feeding mechanisms
monitoring machine operations and quality of printing
undertaking maintenance, adjustment, repair and cleaning of machines
producing and managing digital print images, and transferring and outputting images
may set up and operate paper and bookbinding guillotines

Specialisations:
Flexographic Printing Machinist
Gravure Printing Machinist
Label Printing Machinist
Letterpress Printing Machinist
Lithographic Printing Machinist
Reel Fed Printer
Sheet Fed Printer

Occupation: 399111 - Boat Builder & Repairer

Builds, repairs and modifies boats.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing may be required.

Tasks Include:

studying plans and specifications, and preparing templates and scale plans for fabrication and cutting of hull sections.
marking reference points and lines on dry docks and slipways
checking position and functioning of slipway apparatus
assembling shells of boats and erecting hull sections of ship
erecting and preparing launching platforms, conducting pre-launch tests and supervising launching procedures
installing masts, frames, decking, fittings, machines, shafts and safety equipment
building and installing structures such as cabins, machine mountings, propeller supports and rudders
determining repair requirements and procedures
may make hull moulds and fabricate and repair vessels using materials such as aluminium, wood, glass, reinforced plastic, carbon fibre, Kevlar, fibreglass and concrete

Specialisations:
Composite Boat Builder
Rigger (Boat)
Sparmaker
Wooden Boat Builder
Yacht Builder

Occupation: 399912 - Interior Decorator

Plans the interior design of commercial or residential premises and arranges for decorating work to be done.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Associate Degree, Advanced Diploma or Diploma (ANZSCO Skill Level 2)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing may be required.

Occupation: 324212 - Vehicle Trimmer

Installs, repairs and replaces the interior trim of vehicles such as seats, linings, floor coverings and door trims.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing may be required.

Tasks Include:

constructing framework sections in metal, wood, fibreglass and other materials using shaping machines and cutting and welding equipment
bolting, screwing, riveting and welding sections together to form complete frameworks
cutting and shaping panels of sheetmetal, aluminium and reinforced plastic and attaching to frameworks using hand and power tools
modifying assembly line vehicles to special requirements
preparing new vehicle trim work according to drawings and sketches, and removing old coverings and fittings from vehicles and taking new measurements
selecting and cutting pieces of fabric, vinyl and leather and sewing pieces together using heavy-duty sewing machines
installing internal trim in vehicles such as lining, floor coverings and armrests
attaching door trims, rubber seals, locks and handles

Specialisation:
Vehicle Upholsterer

Occupation: 334113 - Drainer

Installs, maintains and designs below-ground drainage systems and associated sewerage or effluent disposal systems. Registration or licensing is required.

Tasks Include:

studying blueprints, drawings and specifications to determine the layout of plumbing systems and materials required
setting out and installing hot and cold water systems and assoicated equipment
installing water-based fire protections systems, including fire hydrants, hose reels and sprinkler systems
designing and installing sanitary plumbing and water supply systems, discharge pipes and sanitary fixtures
fabricating and installing soil and waste stacks
assembling and installing mechanical services plant, air handling and conditioning equipment and small bore heating systems
installing sewerage and effluent pumping equipment and disposal systems
installing below-ground drainage systems and associated ground support systems
installing gas appliances, flues and pressure regulating devices
fabricating and installing metal roofing, rainwater goods and flashings

Specialisation:
Septic Tank Installer

Occupation: 351112 - Pastrycook

Prepares and bakes buns, cakes, biscuits and pastry goods.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks Include:

checking the cleanliness of equipment and operation of premises before production runs to ensure compliance with occupational health and safety regulations
checking the quality of raw materials and weighing ingredients
kneading, maturing, cutting, moulding, mixing and shaping dough and pastry goods
preparing pastry fillings
monitoring oven temperatures and product appearance to determine baking times
coordinating the forming, loading, baking, unloading, de-panning and cooling of batches of bread, rolls and pastry products
glazing buns and pastries, and decorating cakes with cream and icing
operating machines which roll and mould dough and cut biscuits
emptying, cleaning and greasing baking trays, tins and other cooking equipment

Specialisation:
Cake Decorator

Occupation: 392312 - Small Offset Printer

(Instant Printer Operator)

Sets up and operates small offset printing preses used in instant print shops or for in-house printing.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks Include:

setting, adjusting and monitoring substrate-feed mechanisms, delivery mechanisms, inking systems and other printing machine functions
mixing ink and solvents to standard, and regulating paper and ink supply during print runs
monitoring, evaluating and determining press operations manually and by computer to check print quality standards aganst proofs and detect malfunctions
producing a variety of printed products using relief, lithographic, flexographic and gravure printing presses, and in-line finishing systems
preparing plates, blankets and impression cylinders on small offset lithographic printing presses
loading paper into feeding mechanisms
monitoring machine operations and quality of printing
undertaking maintenance, adjustment, repair and cleaning of machines
producing and managing digital print images, and transferring and outputting images
may set up and operate paper and bookbinding guillotines

Specialisation:
Digital Printer

Occupation: 399112 - Shipwright

Constructs, fits out and repairs ships.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing is required.

Tasks Include:

studying plans and specifications, and preparing templates and scale plans for fabrication and cutting of hull sections.
marking reference points and lines on dry docks and slipways
checking position and functioning of slipway apparatus
assembling shells of boats and erecting hull sections of ship
erecting and preparing launching platforms, conducting pre-launch tests and supervising launching procedures
installing masts, frames, decking, fittings, machines, shafts and safety equipment
building and installing structures such as cabins, machine mountings, propeller supports and rudders
determining repair requirements and procedures
may make hull moulds and fabricate and repair vessels using materials such as aluminium, wood, glass, reinforced plastic, carbon fibre, Kevlar, fibreglass and concrete

Specialisations:
Loftsman/woman (Marine)
Ship's Carpenter

Occupation: 399913 - Optical Dispenser

Interprets optical prescriptions, and fits and services optical appliances such as spectacle frames and lenses.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training maybe required in addition to the formal qualification. Registration or licensing may be required.

Occupation: 324311 - Vehicle Painter

Prepares surfaces of vehicles, matches and mixes colours and applies paint. Registration or licensing may be required.

Tasks Include:

removing rough spots on vehicle panels
sanding surfaces by hand and with power sanders
masking areas not to be painted with tape and paper
colour matching and mixing paints to match paint shades, and selecting pre-mixed paint
applying primer and finishing coats using spray-guns, and sanding surfaces between coats
touching up paintwork and applying polish to vehicles
removing masking papers, and waxing and polishing finished paintwork
painting signs and artwork on vehicles
treating vehicles with rust-proofing chemicals

Occupation: 334114 - Gasfitter

Installs, maintains and repairs gas mains, piping systems downstream of the biller meter, and appliances and ancillary equipment associated with the use of fuel gases, including liquefield petroleum gas systems. Registration or licensing is required.

Tasks Include:

studying blueprints, drawings and specifications to determine the layout of plumbing systems and materials required
setting out and installing hot and cold water systems and assoicated equipment
installing water-based fire protections systems, including fire hydrants, hose reels and sprinkler systems
designing and installing sanitary plumbing and water supply systems, discharge pipes and sanitary fixtures
fabricating and installing soil and waste stacks
assembling and installing mechanical services plant, air handling and conditioning equipment and small bore heating systems
installing sewerage and effluent pumping equipment and disposal systems
installing below-ground drainage systems and associated ground support systems
installing gas appliances, flues and pressure regulating devices
fabricating and installing metal roofing, rainwater goods and flashings

Specialisations:
Gas Main & Line Fitter
Liquefied Petroleum Gasfitter

Occupation: 351211 - Butcher or Smallgoods Maker

Selects, cuts, trims, prepares and arranges meat for sale or supply, operates meat or smallgoods processing machines, or manages the processes in the production of smallgoods.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks Include:

preparing meat for sale by removing bones, trimming fat and cutting, mincing and grinding meat to shape and size for display or as ordered
preparing crumbed cuts of meat, and marinating, seasoning and curing special cuts
selecting and preparing meat to produce smallgoods
operating machines to grind, mix, mince and tenderise meat
making seasonings and pickles by mixing spices, salt and other ingredients
operating sausage filling machines, smoking chambers, and cooking kettles and vats
advising customers on the suitability and uses of cuts of meat
may assist in menu planning and scheduling, and in estimating food production costs

Occupation: 393111 - Canvas Goods Maker

Fabricates and repairs canvas and related products such as awnings, tents, tarpaulins, horse rugs and caravan annexes.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III inclulding at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks Include:

cutting and preparing canvas, leather and sailcloth to design specifications, patterns and drawings
sewing, gluing and riveting sections of canvas together to make articles such as awnings, tents, tarpaulins and horse rugs
attaching grommets, fastenings and other fittings to canvas goods
joining parts of leather articles using riverts, hand sewing, sewing machines, tools and adhesive
restoring and repairing leather articles
fabricating sails
designing patterns and prototype of boots and shoes
making and grading patterns using manual and computerised methods
clicking synthetics, corrected grains, leather linings and leather outers by hand and machine
altering and repairing footwear

Occupation: 399211 - Chemical Plant Operator

Controls the operation of chemical production plant.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing may be required.

Tasks Include:

controlling equipment performing continuous and batch processes to process chemicals and natural gas, manufacture refined petroleum products, and blend petroleum base stocks to produce commercial fuels, lubricating oils and asphalt
controlling the preparation, measuring and feeding of raw material and processing agents such as catalysts and filtering media into plant
patrolling and inspecting equipment to ensure proper operation and setting operating controls on equipment
analysing samples and readings and recording test data
controlling records of production, quantities transferred and details of blending and pumping operations
checking equipment for malfunctions and arranging maintenance
operating power generation plant controls to produce required load
monitoring operation of power generation plant and interpreting instrument readings
authorising procedures to isolate high-voltage and low-voltage electrical apparatus and plant
writing reports and maintaining records on equipment performance, instrument readings and switching operations
carrying out routine operating tests

Specialisations:
Chemicals Distiller
Chemicals Fermentation Operator
Industrial Gas Production Operator
Paint Maker
Pharmaceutical Plant Operator
Pilot Plant Operator

Occupation: 399914 - Optical Mechanic

Operates machines to grind, polish and surface optical lenses to meet prescription requirements, and fits lenses to spectacle frames.

Skill Level:
The entry requirement for this occupation is the qualifications and experience (AQF Certificate III including at least 2 years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)). At least 3 years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training maybe required in addition to the formal qualification. Registration or licensing may be required.

Occupation: 323112 - Aircraft Maintenance Engineer (Mechanical)

Inspects, tests, repairs and installs aircraft hydromechanical and flight system components and aircraft engines, subassemblies and components. Registration or licensing may be required.

Tasks Include:

dismantling, inspecting, testing, repairing and reassembling aircraft engines, ancillary motors and engine accessories, electrical systems, and subassembles of aircraft frames
installing electrical circuits and equipment
testing aircraft communication equipment, aircraft instrumentation and electronic systems using electronic testing equipment and specialised test apparatus
replacing and testing aircraft oxygen system components
assembling parts and subassemblies of aircraft frames
conducting routine pre-flight inspections of engines, aircraft frames and mechanical systems
maintaining records of action taken
may manufacture aircraft electrical, instrument and radio hardware components

Specialisations:
Aircraft Maintenance Engineer (Airframes)
Aircraft Maintenance Engineer (Engines)
Aircraft Technician (Air Force, Army)
Aviation Technician (Navy)
Licensed Aircraft Maintenance Engineer (Airframes)
Licensed Aircraft Maintenance Engineer (Engines)

Australian Visa Experts

VISAS

COMPANY

MENU